Save. Share. Connect.
Sunday, May 29, 2016
VOLUME - NUMBER
Switches & Relays
HOME / CURRENT ISSUE
Add Message Board
EMI Shielding Material from Leader Tech
Shielding material can be diecut to shape.
Tampa, FL — Many electronic enclosures have gaps that allow unwanted RF and electromagnetic interference to escape into the surrounding environment. These openings are commonly found around the I/O panel, backplane and access panels of the enclosure. A highly effective way to control this problem is to cover these openings with a custom, die-cut shielding gasket. Leader Tech's low compression CFS Conductive Foam Shielding materials deliver a typical Shielding Effectiveness of 60dB between 10MHz to 3GHz and can be die-cut to precise specifications.
CFS Conductive Foam is offered in three standard thicknesses and has a low-resistance polyester fabric surface and a resilient Nickel-Copper polyurethane foam center. The conductive foam exhibits a compression load of 2.1 psi at 30 percent compression and has an operational temperature range from -40 to +156°F (-40 to +69°C). A conductive, pressure-sensitive adhesive is also available to help facilitate easy installation.
Contact: Leader Tech, 12420 Race Track Rd., Tampa, FL 33626
866-832-4364 or 813-855-6921 fax: 813-855-3291 E-mail: firstname.lastname@example.org Web:
© 2015 USTECH. All Rights Reserved. |
Contact Us: 610-783-6100 | email@example.com
powered by GIM
You were trying to view a protected page.
Please login to gain access or cancel to go back to the site.
Remember User Name
Stay signed in.
Forgot your password?