|HEROLDSBERG, GERMANY - IPTE now supplements their equipment portfolio with a selective wire soldering production cell especially directed at demanding soldering processes on PCBs, hybrid ceramics, flexible film materials and many more substrates. Moreover, the cell can be used for soldering on PCB assemblies already incorporated into unit housings. This special feature renders the soldering cell a highly flexible solution compared to other soldering machines on the market.
The soldering locations can be programmed with a feeding accuracy of 0,1mm and with controlled speeds as well. The soldering tip operates with programmable angles features also a defined approaching speed and allows movements in any direction. Active sensors efficiently avoid collisions during action of the tip. In addition, the feeding speed of the solder wire too can be programmed. The entire soldering process consists as usually of the sequence preheating, soldering and cooling. Taken together, the cycle time is well below 3 seconds.
Other integrated standard features are: a cleaning station for the soldering tip, soldering smoke remover, reel color detection, and camera-based tip inspection gear. Optionally available are a nitrogen soldering unit for lead-free processes, and a smoke remover with integrated filter.
Rotating scrubbers are used for tip cleaning, and additionally movements of the tip for the cleaning action can be programmed. In addition, the clean-up frequency is performed according to a specified time span or a certain number of soldering cycles. The exchange of the soldering tip is made easy, also in this case the user can switch between a given time span or a number of soldering cycles. Automatic calibration of the tip after the exchange is supported by the machine software and increases output efficiency.
Feeding of the board assemblies can be customer-specifically provided. Modules for in-line or off-line operation with work piece holders, single or pallet-based feeding are available.
This selective soldering station features the powerful operation software TS1 allowing for reduced cycle times, and optimize all user interaction processes. One outstanding result of this optimization is the minimization of the effort and time needed for the programming of the soldering procedures. The easy-to-handle soldering station supports quick plug-and-play application.
IPTE is a supplier of automated production equipment for the electronics and mechanics industry and one of the market leaders in this segment. The company designs turnkey-automation systems of all kinds for production, test and further processing of printed-circuit boards, as well as of board assemblies and final products. IPTE runs nine engineering and production sites, so in Belgium, Germany, France, Spain, Portugal, Mexico, Estonia, Romania and China.
The headquarters of the IPTE are located in Genk, Belgium. IPTE supplies global sales and services to its customers from 15 facilities in Europe, America and Asia. IPTE currently employs 600 people.
The IPTE Group's client list includes companies such as Autoliv, Bosch, Continental, Delphi, Ericsson, Hella, Johnson Controls, Lear, Leoni, Schrader, Siemens, TechniSat, TP Vision, TRW, Vaillant, Valeo, Visteon und Yazaki.
Further information about IPTE at: www.ipte.com