Save. Share. Connect.
Sunday, October 23, 2016
VOLUME - NUMBER
Switches & Relays
Add Message Board
Electro-Mech Multi-LED PB Switch
Multi-LED pushbutton switch.
South El Monte, CA — Electro-Mech's new SW44925 multi-LED pushbutton switch assembly has been re-engineered to improve illumination brightness, diffusion and capabilities. The SW44925 Series still matches industry requirements, including a rubber dust boot for panel protection and an enlarged "mushroom" lens cap. The switch now offers up to 8 total SMT LEDs to achieve high brightness and better light diffusion.
Available in a variety of different lens cap, legend and filter materials, the unit is capable of display configurations in full, split, or quad segments, and can provide both continuously visible legends and hidden legends that become visible when LED circuits are activated. End use application is suitable for flight cockpit or simulation, as specifications match industry standards.
The product installs from the front of the panel and attaches using a mounting sleeve that retains the switch housing, fitting into an industry-standard 0.698-in. square hole. With multiple LEDs built into the pushbutton assembly, the product offers maximum brightness and redundancy. Night Vision (NVIS) filtering is also available. Switch action is available in momentary, momentary snap-feel, or alternate action.
The switches provide life capability of 100,000 actuations minimum. Ratings are 2.0A resistive, 0.5A inductive, with operating pressure of 3 lbs. ±1-lb (1362g ±454g), plunger travel 0.187-in. nominal (4.7mm). LED circuits are independent. Lens protrusion is 0.250 standard, but can be modified. Switch contacts are silver plated, and gold plating is optional. Interconnect is provided with standard EMC solder lugs and accept 20AWG wiring (PC pin terminals are available). The switch housing requires less than 3.0-in. behind the display panel. The unit is designed to meet applicable military and stringent commercial standards, including seal, moisture resistance, vibration, temperature, shock and environmental requirements, and is rated to IP64 protection standards.
Contact: Electro-Mech Components, Inc., 1826 Floradale Ave., South El Monte, CA 91733-3689
888-442-7180 fax: 626-350-8070 E-mail: Terry@electromechcomp.com Web:
© 2015 USTECH. All Rights Reserved. |
Contact Us: 610-783-6100 | firstname.lastname@example.org
powered by GIM