Save. Share. Connect.
Saturday, May 28, 2016
VOLUME - NUMBER
Switches & Relays
HOME / CURRENT ISSUE
Add Message Board
Ironwood Intros Stamped Spring Pin Socket
Test socket with cooling fan.
Eagan, MN — Ironwood Electronics has introduced a stamped spring pin socket addressing high performance requirements for testing Unisem's 124 lead QFN: CBT-QFN-7031. The contactor is a stamped spring pin with 31 gram actuation force per ball and cycle life of 500,000 insertions.
The self inductance of the contactor is 0.88nH, insertion loss <1dB at 15.7GHz and capacitance 0.097pF. The current capacity of each contactor is 4 amps at 40°C temperature rise. Socket temperature range is -55 to +180°C.
The socket also has a clamshell lid for ease of operation and a 3 watt heat sink with small DC fan. It also has a wave spring with swivel compression plate for vertical force without distorting device position. The specific configuration of the package to be tested in the CBT-QFN-7031 is a QFN, 9-9mm, 0.5mm pitch, 124 positions with center ground pad. The socket is mounted using supplied hardware on the target PCB with no soldering, and uses the smallest footprint in the industry. That small footprint allows inductors, resistors and decoupling capacitors to be placed very close to the device for impedance tuning. To use, place QFN device into the socket and close the lid by snapping the latch. This socket can be used for quick device screening, device characterization at extreme temperatures as well as final production test.
Contact: Ironwood Electronics, 1335 Eagandale Court, Eagan, MN 55121
800-404-0204 or 952-229-8200 fax: 952-229-8201 E-mail: firstname.lastname@example.org Web:
© 2015 USTECH. All Rights Reserved. |
Contact Us: 610-783-6100 | email@example.com
powered by GIM