Save. Share. Connect.
Thursday, January 19, 2017
VOLUME - NUMBER
Front Page News
People in the News
Electronic Mfg. Services
Electronic Mfg. Products
Special Features: SMT and Assembly
Product Preview: SMTAI and productronica
Trade Show Calendar
October 2013 Issue
Product Preview: SMTAI and productronica
ACD EMS: PoP Assembly Services
Richardson, TX — ACD, an EMS supplier to the electronics industry of Package-on-Package (PoP) assembly is geared toward supporting high-mix, high-technology assembly from prototypes through low-to-mid-volume production. With a focus on high-end technology, ACD runs two shifts to respond to a variety ...
ACE: Latest Selective Soldering Technology
Spokane Valley, WA — ACE Production Technologies, Inc. has released its KISS-104 selective soldering system. According to the company, the system is capable of soldering printed circuit boards up to 18 x 24-in. (457 x 610mm), and many leading-edge features are included as standard. A fully configured ...
Agilent Intros Faster RF Signal Generation
Santa Clara, CA, — Agilent Technologies Inc. (NYSE: A) has introduced the M9391A, a 1MHz to 3 or 6GHz PXIe vector signal analyzer, with up to 160MHz bandwidth designed to test the latest wireless standards. Used in combination with the company's modular X-series applications, the M9391A delivers ...
Alpha 1: Full Line Solutions
Binghamton, NY — While there are several options available to purchase used electronic assembly equipment, there are very few, if any providers who have the capability to fully implement complete line solutions. Alpha1 1 Technologies not only sources and installs the equipment, the company uses a combined 40 ...
Aqueous Technologies: Defluxing and Cleanliness Testing
Rancho Cucamonga, CA — Aqueous Technologies is introducing its Trident XLD zero discharge defluxing and cleanliness testing system. The Trident XLD is the industry's environmentally responsible fully automated defluxing and cleanliness testing system. It is capable of removing all flux types including ...
ASC International: Three VisionPro Systems
Medina, MN — ASC International, a manufacturer of 3-D solder paste inspection and automated optical inspection (AOI) systems, is highlighting three VisionPro systems. The VisionPro AP500 SPI system incorporates the most advanced, rapid 3D inspection technology within a stylish vibration-free, fully ...
ASM: Consistent Workflows for Electronics Production
Munich, Germany — ASM is showing off the latest versions of the SIPLACE X, SIPLACE SX, SIPLACE CA and SIPLACE Di placement platforms with their exceptional speed and flexibility for NPI processes, high-volume runs and quick product changeovers. In addition, the SIPLACE team is demonstrating that ...
Binder-USA: Angled M8 Connectors
Camarillo, CA — Binder-USA has introduced a new angled M8 field-attachable connector with screw clamp termination. The screw clamp termination makes field-assembly simple by eliminating the need for special tooling. The M8 connectors are commonly used for sensors and actuators in the automation and ...
North Billerica, MA — BTU International, Inc., has introduced its convection reflow oven platform DYNAMO 8A.
Cobar Unveils New Solder Technologies
Londonderry, NH — The Balver Zinn Group's Cobar Solder Products Inc. has introduced its BRILLIANT B2012 Solder Wire and OT2 Solder Paste. The solder wire is halide-free, rosin based and designed for manual and robotic soldering. B2012 is odorless and shows excellent soldering and wetting performance ...
Compact Linear Nano Stage from PI
Auburn, MA — Precision motion specialist PI (Physik Instrumente) LP is offering a new type of positioning stage based on a miniaturized ceramic inertia drive. The PI miCos LPS-45 linear translation stage is designed to position samples along a precisely guided path with distances up to 1-in. (25 ...
Count On Tools: New StripFeeder and Repair Services
Gainesville, GA — Count On Tools, Inc. (COT), has introduced its StripFeeder Modular (.mod) System version 2. According to the company, the award-winning StripFeeder System is the best solution for loading tape-and-reel components onto compact modules for prototyping and high-mix low-volume applications ...
Data I/O: New High-Performance Automated Programming System
Redmond, WA — Data I/O Corporation (NASDAQ: DAIO) has introduced the PSV7000 automated programming system, describing it as the world's premier automated programming system with the speed, flexibility and fast changeover to handle complex jobs at up to 50 percent lower cost.
ECT Connector Solutions
Pomona, CA — Everett Charles Technologies' (ECT) innovative solutions include its Tilt Universal Grid Prober, incorporating tilt technology that is said to provide the world's most advanced fixture solution. According to the company, it provides reliable testing down to 0.015-in. (0.38mm) targets ...
ECT Showcases Electrical Test Products
Pomona, CA — Everett Charles Technologies (ECT) is showcasing Innovative contact products, products from the fixture service group and fixture accessories being shown include contact products: for edge, metrix, LFRE and high current.
EPCOS SMD NTC Thermistors from TDK
Iselin, NJ — TDK Corporation has introduced two new series of narrowly toleranced EPCOS NTC thermistors in EIA 0402 and 0603 SMD case sizes. These components have a rated resistance of 10kΩ in tolerance classes ±1, ±3 and ±5 percent, and use a ceramic substrate.
Ersa: Large Line of Soldering Solutions
Wertheim, Germany — Ersa is showing the newest models of its soldering systems, printers, rework and inspections systems as well as hand soldering tools. In addition to presenting innovative technical solutions, the focus is on energy efficiency throughout the company's product line.
Essemtec Intros Paraquda 4C with PFV
Aesch, Switzerland — Essemtec, the Swiss manufacturer of production systems for electronic assembly and packaging, is introducing the Paraquda SMT pick-and-place machine. The new entry combines a large feeder capacity (up to 240 intelligent feeders), fast programming and changeover while the machine ...
FCT Assembly Intros Paste Printing Technology
Greeley, CO — FCT Assembly's new NanoSlic
stencil is said to be the most advanced stencil technology available for solder paste printing. The new NanoSlic stencil is based on the proven Slic
stencil with its advanced foil composition and FCTA's state-of-the-art laser cutting process. A permanent ...
Finetech: High Force Platform
Gilbert, AZ — Finetech, a supplier of micro-assembly equipment, has developed a new high force configuration of its versatile FINEPLACER
pico ma platform targeting leading-edge anisotropic conductive film (ACF) applications. The tool achieves applied bonding forces of up to 700 N, which is critical to ensuring ...
© 2015 USTECH. All Rights Reserved. |
Contact Us: 610-783-6100 | firstname.lastname@example.org
powered by GIM