TAMPA, FL ― Speedprint Technology will highlight the SP710avi with Advanced Dispense Unit at the Long Island SMTA Expo & Technical Forum, scheduled to take place Wednesday, October 9, 2013 at the Islandia Marriott Long Island in New York.
The SP710avi advanced screen printer combines Speedprint’s commitment to high performance and reliability with all the necessary features for processing high-technology substrates as standard equipment. The system delivers performance and functionality associated with machines two or three times the cost. It was designed to cope with the rigors of high-volume SMT production while incorporating the flexibility needed in high-mix, quick product setup and changeover environments. Speedprint takes pride in the SP710avi for the absolute lowest operational and ownership costs. The design simplicity and ease of use adds to the tremendous value overall value of the SP710avi.
The SP710avi offers further value with when equipped with the Automatic Dispense unit (ADu). The feature provides on-board dispense capability of solder paste and/or adhesive. The system can be configured with single or dual dispense heads and allow users to eliminate additional capital outlay by integrating this functionally into the printer.
The ADu defines flexibility from its ease of programming through to calibration and cleaning. Utilizing the PCB Gerber file, an operator can simply drag any region of interest to automatically program volume deposits of paste or glue. There is no need to spend time on each deposit site adjusting to optimize the volume, point and drag. This means that a complete PCB can be programmed for production or prototype work in just seconds.
For more information about the Speedprint SP700avi or SP710avi Screen Printers, meet with company representatives at the Long Island Expo & Technical Forum or visit the company on the Web at www.speedprint-tech.com.