Save. Share. Connect.
Tuesday, September 27, 2016
VOLUME - NUMBER
Switches & Relays
Add Message Board
WAGO Intros Incremental Encoder
Germantown, WI — WAGO Corporation has added an HTL Incremental Encoder/Counter Module to its SPEEDWAY IP67 I/O-System. The machine-mountable 767-5202 evaluates incremental encoders and SSI absolute encoders at 24V signal levels in harsh environments. It also provides a counting function for binary signals up to 250kHZ. This makes it suitable for counting motor revolutions in applications such as topdrives, line shafts or motion-intensive machinery found in food processing and packaging.
The unit provides two 8-pole M12 encoder ports. Channel configuration options include: type of evaluation and sensor, output format, filters, inversion, latch, gate, preset, cam, simulation and limits. 767-5202 also has two 5-pole M12 ports with four configurable digital inputs/outputs for sensors and actuators. Two of these channels can serve as pulse-width-modulated outputs, with the 100 Hz-10kHz clock frequency having a pulse-width repetition rate of 0-100 percent. Users may set previously defined outputs directly as a function of counter readings.
The 767-5202 is configurable using fieldbus-independent FDT/DTM, or fieldbus-dependent device descriptions (e.g., GSD or GSDML). It is programmable using a USB interface integrated into the fieldbus coupler, or directly through fieldbus (not applicable to Ethernet-based couplers).
The machine-mountable system processes 1000 instructions within 150 microseconds. It incorporates IP67 fieldbus-independent Ethernet controllers (IEC 61131-3 programmable) and couplers, as well as DI, DO and DIO modules. The system accommodates up to 64 modules per node with a 1,650 foot node extension.
Contact WAGO Corporation, N120 W19129 Freistadt Road, Germantown, WI 53022
800-346-7245 fax: 262-255-3232 E-mail: firstname.lastname@example.org Web:
© 2015 USTECH. All Rights Reserved. |
Contact Us: 610-783-6100 | email@example.com
powered by GIM