Save. Share. Connect.
Friday, September 30, 2016
VOLUME - NUMBER
Front Page News
People in the News
Electronic Mfg. Services
Electronic Mfg. Products
Special Features: Test and Measurement
Product Preview: Semicon
Trade Show Calendar
July 2013 Issue
Electronic Mfg. Products
AMEC: Dry Etch Technology for Memory Devices
Shanghai, China and Seoul, Korea — Advanced Micro-Fabrication Equipment Inc. has developed a Single-Station Chamber Advanced Dielectric Etcher, called the SSC AD-RIE
, capable of processing in the most rigorous semiconductor applications. In less than 12 months, the Primo SSC AD-RIE system was ...
ASM: New Gen SIPLACE X-Series Is Faster, Smaller
Suwanee, GA — New from SIPLACE is ASM Assembly Systems' recently unveiled next generation of its successful SIPLACE X high-end platform. Although the new machines are up to 0.5 meters shorter than the previous generation, they offer up to ten percent more performance. The new SIPLACE X4i S flagship ...
Asscon Vapor Phase Profiling from A-Tek
Longmont, CO — A-Tek Systems Group has released Dynamic Profiling, engineered and developed by Asscon Systemtechnik, the innovative industry expert in vapor phase reflow technology. Dynamic Profiling is a tool that provides for the automatic adjustment and control of reflow profiles.
ASSET Releases New eBook on JTAG
Richardson, TX — A new eBook from ASSET
InterTech explains how the structural test methodology based on the IEEE 1149.1 boundary scan standard, known as JTAG, can apply functional tests to I2C and SPI system monitors during prototype board bring-up and later during production of the circuit board ...
B&K Intros 1U Power Supply System
Yorba Linda, CA — B&K Precision has expanded its DC system power supply offerings with the introduction of the model 9115 multi-range programmable DC power source. The 9115 can deliver up to 1200W in multiple combinations of voltage up to 80V and current up to 60A.
Chemtronics Intros 2 Water-Based Conformal Coatings
Kennesaw, GA — Chemtronics
has introduced two new water-based conformal coatings that reportedly provide superior protection for circuit boards, low odor, and lower VOC emissions. Konform
UR-A Conformal Coating is a special water-based, urethane material that effectively protects circuits from ...
Count On Tools Intros ezTOOL for Midas Tip Replacement
Gainesville, GA — Count On Tools Inc. has introduced its new MYDATA ezTOOL, an assembly/disassembly fixture for MYDATA Midas Tool Tips. With the new ezTOOL, customers can replace tool tips quickly with precision alignment for critical pick-and-place tooling. What sets the ezTOOL apart is that it ...
Dow Corning and SUSS MicroTec Report New Bonding Solution
Las Vegas, NV — Both 2.5D and 3D IC integration offer significant potential for reducing the form factor of microelectronic devices targeting next-generation communication devices, while improving their electrical and thermal performance. Cost-effective temporary bonding solutions are a key enabler for this ...
FCT: Lead-Free Water-Soluble Paste
Greeley, CO — FCT Assembly's WS889 solder paste is a lead-free water-soluble solder paste. According to the company, the paste provides excellent wetting on all surface finishes with consistent printing down to low surface area ratios and can be run in RH of 30-65 percent without slump.
Fujipoly Intros New Gap Filler Pad
Carteret, NJ — Fujipoly has introduced Sarcon
GR25A-00-50GY, an extremely soft thermal gap filler pad that also exhibits a very low thermal resistance. This thermally conductive silicone-based material easily conforms to most component shapes and board protrusions while exhibiting very low pressure ...
Goepel Opens Platform to Embedded System Access
Jena, Germany — In cooperation with selected partners within the GATE
Alliance Program, Goepel electronic has developed a powerful Inter Process Link (IPL) for its JTAG/Boundary Scan software platform SYSTEM CASCON
Grieve Walk-In Oven Provides 500°F
Round Lake, IL — Grieve Corp.'s No. 813 is a gas-heated 500°F (260°C) walk-in oven is currently used for curing printed circuit boards. The oven's 350,000 BTU/HR uses a modulating natural gas burner and workspace dimensions are 48 x 48 x 72-in. (1.2 x 1.2 x 1.8m).
High-Current Probes from ingun
Konstanz, Germany — New from ingun is its HSS-624 M — a high-current probe that can handle up to 100A with Kelvin contact. The new screw-in high-current probe series is designed for transferring high currents while, at the same time, carrying out a voltage measurement directly on the contact pad ...
Low-Cost Conductive LED Die Attach Adhesive
Delaware, OH — Engineered Material Systems has introduced its CA-105 Low-Cost Conductive LED Die Attach Adhesive for attaching LEDs and other small semiconductor die to silver and copper lead frames. The new adhesive is approximately half the cost of a pure silver-filled die attach adhesive, has ...
MicroCare Unveils Innovative PCB Cleaner
New Britain, CT — MicroCare
has introduced its innovative PCB cleaner called "UltraClean
". The VOC-free flux remover has been formulated to deliver high-performance cleaning on lead-free circuits. In addition, the new cleaner has been engineered to meet or exceed all of the different health,
safety and environmental restrictions imposed upon cleaning chemistries around the world. The product uses a totally new solvent formulation, so it is VOC-free, halogen-free, ozone-safe and safe for people. It also is the first product to use a new, non-flammable propellant — an innovation that reduces any global warming impact by 99 percent or more. The end result is a powerful but safe cleaner that is absolutely benign in the environment.
MTI Electronics Adds More AOI Capacity
Menomonee Falls, WI — MTI Electronics has added more Automated Optical Inspection capacity to its SMT production with a new Automated Optical Inspection (AOI) system for full defect coverage at high resolution for printed circuit board production. This AOI equipment incorporates advanced 5 megapixel color camera ...
PEI Expands Custom Photo-Etched Lead Frames
Milford, MA — Photofabrication Engineering (PEI) has expanded its manufacturing capabilities for custom-designed, photochemically-etched surface-mount and insert-mount lead frames for integrated circuit manufacturing. Using a wide variety of base materials, PEI plates lead frames with silver, nickel ...
RTP Designs Plastics for Innovative Cable Tie Tool
Winona, MN — RTP Company was able to solve a materials design problem for injection molding company New Berlin Plastics for final customer HellermannTyton, a manufacturer of high-quality cable management products. HellermannTyton needed help producing an innovative cable tie tool it was developing ...
Samtec Intros Parallel Action Hand Tool
New Albany, IN — Samtec's new Hand Tool (CAT-HT-309-2830-12) is specifically designed to crimp the 1.00mm CC09R Series reeled contacts on 28 or 30 AWG wire. This hand tool is suitable for low volume, pre-production and repair applications of discrete wire components. A mini reel of contacts (CC09M ...
Sovella Workstations Maximize Productivity
Kennesaw, GA — Sovella has developed its Concept workstation, which is available with manual, hand crank, and motorized height adjustment options. The workstations are designed to meet the needs of the high-tech, electronics, and laboratory business sectors, where ergonomic qualities are an important ...
© 2015 USTECH. All Rights Reserved. |
Contact Us: 610-783-6100 | firstname.lastname@example.org
powered by GIM