SAN JOSE, CA —
A-Laser, a division of FCT Assembly and a premier laser cutting service specializing in the ablation of ultra-thin metals and plastics, will highlight its new laser marking capability in Booth #521 at the Del Mar Electronics & Design Show (DMEDS), scheduled to take place May 1-2, 2013 at the Del Mar Fairgrounds in San Diego, CA.
With A-Laser’s marking services, serial numbers, bar codes, part numbers and logos can be laser marked in a wide variety of materials. The laser process ensures a quality, precision, permanent mark that is highly repeatable and can be created on flat as well as 3-D surfaces. Systems utilized by A-Laser can create characters smaller than 20 mils lightly marked into the surface or etched to specified depths.
Also, the company provides routing of panels, meeting the highest quality standards. A-Laser is able to work with metals in thicknesses between 0.00"-0.025" and non-metals between 0.001" and 0.060".
The company provides tight tolerance laser cutting solutions for a wide range of industries, fulfilling both prototype and production needs. UV Laser cutting provides unmatched benefits, including virtually carbon free laser cuts, 20 μm laser drilling, and 2 mil slot laser routing. This service is suitable for many thin metal foils, thermoplastic and thermoset materials and material/adhesive combos including polyimide shims.
A-Laser provides high cutting edge precision and position accuracy (±0005"), fine contours and virtually radius-free internal edges (<20 µm beam), and contact-free material processing to prevent material distortion. Same day quotes and 24-hour turnaround also are available.
For more information about A-Laser, visit www.a-laser.com.