Save. Share. Connect.
Wednesday, September 28, 2016
VOLUME - NUMBER
Switches & Relays
Add Message Board
Electro-Mech Intros Bi-Color LED Switch
Bi-color LED switch.
South El Monte, CA — Electro-Mech Components, Inc. has introduced the Series SW44834 Bi-Color LED Switch Series offering a solution for DVR signal switching. An end-use application is for an operator (bus driver) to actuate switch to time stamp an event on full time DVR safety video recording. During replay, the operator can quickly locate event mark on playback to study the video more closely.
The SW44834 Series derives from the company's Series 20, and comes in a low-profile unitized housing, with circuitry available from SPST to DPDT, and momentary or alternate action switching mechanisms to meet customer requirements. An optional clear or translucent (smoke) gray lens cover is available for protection or to provide hidden legends.
Switch ratings are 2.0 Amps resistive, 0.5 Amp inductive at 30VDC or 125VAC. Other features of the SW44834/Series 20 include an operating pressure of 2 lbs.±1 lb. (0.9 kg ±0.45 kg), plunger travel of 0.125-in. (3.2m), weight of less than one ounce (28g), and a rated life of 100,000 minimum actuations. The switch provides interconnect with solder lug terminals, PCB terminals, or wire pigtail and connector.
Contact: Electro-Mech Components, Inc., 1826 Floradale Ave., South El Monte, CA 91733-3689
888-442-7180 fax: 626-350-8070 E-mail: Terry@electromechcomp.com Web:
© 2015 USTECH. All Rights Reserved. |
Contact Us: 610-783-6100 | firstname.lastname@example.org
powered by GIM