Sunday, May 27, 2018
Home/Current Issue >  Electronic Mfg. Products > 

New Nanotec Stepping Motor Series
Two new stepping motors.
Medford, MA — The new SC Series from Nanotec Electronic is an out-of-the-box combination of a stepper motor with an optical encoder. The first two motors are available in sizes 60mm (Nema 24) and 41mm (Nema 17).

Stepping motors with a mounted encoder have long been available as part of the modular system from the company. The new standard combination is more cost-effective than ordering the products separately and is available from stock.

The motors have a holding torque of 0.5 and 3.54Nm, respectively, and a step resolution of 1.8°. The encoder has a high resolution of 4000 CPR, with quadrature, it can reach 16,000 pulses per revolution. Two encoders are available — 5V and 24V — each with a line driver. The motor and encoder have integrated connectors for simple and fast installation. This combination is especially suitable for closed loop applications with position feedback. Stepper motors with the company's closed-loop controls operate more smoothly and have Torque, Speed and Position Control. Thus, they can be used in applications that were formerly reserved only for servo motors with gearboxes.

Contact: Nanotec Electronic, U.S. Inc., 98 Sheridan Avenue, Medford, MA 02155 781-219-3343 fax: 781-498-1344 E-mail: Web:

search login