Save. Share. Connect.
Thursday, February 23, 2017
VOLUME - NUMBER
Switches & Relays
Add Message Board
Benchtop Conveyor Dispensing System with 6 Heads
Benchtop conveyor dispensing system.
McHenry, IL — Dispense Works, Inc. has introduced the RC conveyorized dispensing system to automatically fill 6 different colors of vinyl (Plastisol) into aluminum molds (pallets). This system uses the SR model (slip roller) conveyor with quick-adjust rails to accommodate pallets of different sizes.
The operator simply places a pallet on the conveyor and selects which fill job to run from the menu. The conveyor allows accumulation of pallets for unattended production and is available in virtually any length. The width is infinitely adjustable as well. All stops/sensors are embedded into the frame.
The MG series robot is an excellent solution with its mechanism and electronics located above the work area for easy access. The dispensing patterns may be created in any graphic/CAD type program or taught with the machine's own advanced jog and teach function. A special pre-programmed software function streamlines setup with tools to control material volume on the fly. Up to 16 heads (valves, syringes, etc.) can be controlled.
Contact: Dispenseworks, Inc., 4071 Albany St., McHenry, IL 6005
815-363-3524 fax: 815-363-8039 E-mail: firstname.lastname@example.org Web:
© 2015 USTECH. All Rights Reserved. |
Contact Us: 610-783-6100 | email@example.com
powered by GIM