Rosenheim, Germany — Multitest's MT2168 pick-and-place handler has been selected for a challenging high-current application by an IDM that is leading in this segment. Multitest is a designer and manufacturer of final test handlers, contactors and load boards used by integrated device manufacturers (IDMs) and final test subcontractors worldwide.
|MT2168 pick-and-place handler. |
The company is providing much more than a "Plug and Yield" solution; the MT2168 will be delivered with a Multitest contactor. In addition, company experts are working closely with the docking supplier and the tester company that specializes in this type kind of application. The flexibility of the pick-and-place system allows for an optimal configuration of the handler to ensure best performance of the entire setup.
High-power applications have strict safety requirements, so the company is collaborating with the tester supplier to integrate highest safety standards in the test cell.
Bringing all of the suppliers together requires active project management, falling on the shoulders of the Multitest project leader, who has been continuously in contact with the customer and all other participating partners. The customer is receiving a fully integrated test cell with all components configured for optimum test yield.
Contact: Multitest Electronic Systems, Inc., 4444 Centerville Road, Suite 105, St. Paul, MN 55127-3700 651-407-7777 fax: 651-407-7290 E-mail: firstname.lastname@example.org Web: http://www.multitest.com