Thursday, September 29, 2016
VOLUME -27 NUMBER 12
Publication Date: 12/1/2012
Advertisements
Archive >  December 2012 Issue >  New Products > 

Infinite Variety with Hammond's Modular Consoles
Control console cabinets.
Cheektowaga, NY — The Series 2000 console range from Hammond Manufacturing enables complex control desks to be created from standard parts, and is now available in both RAL7035 light gray and stainless steel. The system allows units to be stacked in multiple combinations to provide equipment support and display functions exactly where they are required.

The system is so versatile that the range of applications that can be served from the standard components and accessories is virtually unlimited.

Systems are available in four standard widths: 24-in. (600mm), 36-in. (900mm), 48-in. (1200mm) and 60-in. (1800mm). There are three primary components: the base unit, available with either single or dual access; the desk unit with internal access through a lift-up sloping surface; and the turret unit with angled front face and front/rear access.

A stand-alone consolet unit with an integral sloping top is also available. Once the basic structure has been designed, external options such as plinths, footrests or window doors can be added. A huge range of internal accessories such as electrical mounting panels, 19 inch mounting rails, DIN mounting rails swing frames, cable entries, gas struts and many others are available.

The RAL7035 light grey units meet the requirements of NEMA Type 3R, 4 and 12, equivalent to IP66, enabling the consoles to be installed on the shop floor as well as in the control room. The stainless steel versions additionally meet NEMA 4X which make them suitable for various hose-down or corrosive environments.

Contact: Hammond Manufacturing Co., Inc., 475 Cayuga Rd., #100, Cheektowaga, NY 14225-1309 716-630-7030 fax: 716-630-7042 E-mail: klivingston@hammfg.com Web:
http://www.hammondmfg.com or http://www.hammfg.com/2000C

 
 
search login