Thursday, September 29, 2016
VOLUME - NUMBER
Advertisements
Home/Current Issue >  Daily News Archive > 

Share

Applied Motion Products Intros New Line of Quad Stack Motors
Applied Motion Products has announced a new line of ultra powerful quad stack motors.

The exceptional low speed torque of a step motor can be used to accelerate a heavy load or overcome stiff friction, in many cases providing enough excess torque to avoid the use of an expensive gear reducer. It’s no surprise that our most popular motors are the HT17-275 and HT23-601, each providing the highest torque in their respective frame sizes, NEMA 17 and NEMA 23.

Their motor engineering team has been busy developing motors that produce even more torque.

The HT17-278 delivers 113 The HT17-278 delivers 113 ounce-inches of holding torque, a 45% increase over the “275”ounce-inches of holding torque, a 45% increase over the “275”. It can even provide 50 oz-in of dynamic torque at speeds as high as 10 revolutions per second. This motor is available on their website or from a distributor.

The HT23-603 increases the holding torque of our reigning champion, the “601”, by 30%, to 354 ounce inches. Dynamic torque at 10 The HT23-603 increases the holding torque of our reigning champion, the “601”, by 30%rev/sec is 230 oz-in. Volume discounts are available.

Whatever your step motor, driver or software needs, Applied Motion Products has the solution. Please visit them at www.applied-motion.com, or call for expert advice and support at (800) 525-1609.

Share

 
 
search login