Tuesday, July 26, 2016
VOLUME - NUMBER
Advertisements
HOME / CURRENT ISSUE >  Product Previews >  electronica '12 > 

Share

Rubyquartz Xtals in 48 Hours
XCO and XVO oscillators in surface-mount packages.
Aventura, FL — Now being offered by Rubyquartz is 48-hour prototype delivery for XCO and XVO clock oscillators. According to the company, the product offers very low jitter, multiple frequency outputs from a single pin, and prompt shipment.

The new Rubyquartz 33160 XCO and XVO oscillators are designed to offer a true second source to the Fox Electronics XpressO family while adding improved jitter and temperature stability as well as selectable multiple frequencies on one output pin.

Because of their tight parameters, size and shipment availability, these new Rubyquartz products are especially suitable for uses in fiber transmission, wireless and backhaul transmission, storage, video broadcasting and instrumentation.

Both the XCO and the XVO are offered in 5 x 7, 5 x 3.2 and 3.2 x 2.5mm ceramic packages, and are available with LVCMOS, LVPECL and LVDS outputs, allowing for a wide range of possible applications. The oscillators offer a very low rms phase jitter of O.6ps typical in the 12kHz to 20MHz bandwidth. Power supply voltages needed are 3.3V and 2.5V.

A key feature for the XCO and XVO is the availability of a version with very tight overall frequency stability of ±20ppm in a temperature range of -40 to +85°C. The XCO offers the possibility of selecting between one and four factory programmed output frequencies on the same output pin, while the XVO allows up to two configurable output frequencies on one output pin.. The time-conscious can take advantage of Rubyquartz's turn-around time of 48 hours for prototype quantities for its XCO and XVO families.

Contact: Rubyquartz Technology, LLC., 18205 Biscayne Blvd., Ste. #2217, Aventura, FL 33160 305-406-0211 fax: 305-647-2169 E-mail: xcoxvo@rubyquartz.com Web:
http://www.rubyquartz.com


Share

 
 
search login