Monday, May 30, 2016
VOLUME -27 NUMBER 10
Publication Date: 10/1/2012
Advertisements
ARCHIVE >  October 2012 Issue >  electronica Product Preview > 

MicroSD Extreme Temperature Test Socket from Ironwood
MicroSD test socket.
Eagan, MN — Ironwood Electronics has introduced a new MicroSD socket (SBT-MicroSD-01) that addresses high performance requirements for Speed Class Rating, which guarantees a minimum rate at which data can be written to the card. The contactor is a stamped spring pin with 19 gram actuation force per pin and cycle life of 500,000 insertions. Low force eliminates pin sticking issues due to temperature testing.

The self inductance of the contactor is 0.93nH, insertion loss <1dB at 21.9GHz and contact resistance is <16mΩ. The current capacity of each contactor is 4amps at 30°C temperature rise. Socket temperature range is -55 to +180°C. The socket also provides precise alignment to interface pin to contact pads. The specific configuration of the package to be tested in the SBT-MicroSD-01 is a 15 x 11 x 1.0mm microSD form factor. The socket is mounted using supplied hardware on the target PCB with no soldering, and uses smallest footprint for nearby passive components.

To use, place the MicroSD into the socket base, place compression plate and swivel the socket lid assembly on to the base. This socket utilizes compression screw for precise actuation of varying device thickness. This socket can be used for hand test and temperature characterization as well as debugging application that require sustained write throughput.

Contact: Ironwood Electronics, 1335 Eagandale Court, Eagan, MN 55121 800-404-0204 or 952-229-8200 fax: 952-229-8201 E-mail: ila@ironwoodelectronics.com Web:
http://www.ironwoodelectronics.com


Add your comment:

Full Name:
E-mail:
Subject:
Comment:
 

 
 
search login