Save. Share. Connect.
Wednesday, June 29, 2016
VOLUME - NUMBER
Daily News Archive
Front Page Articles
People in the News
Electronic Mfg. Services
Electronic Mfg. Products
HOME / CURRENT ISSUE
Daily News Archive
Add Message Board
Meet BPM Microsystems in France for the CiEN Electronics and Digital Industry Exhibition
HOUSTON, TX —
BPM Microsystems will showcase its model 2800ISP in-system programming station and 3800 automated production programmer in
Adaptsys' booth located in Pavilion 1 – Stand : N° H85
at the upcoming CiEN Electronics and Digital Industry Exhibition, scheduled to take place October 23-25, 2012 at the Paris Expo Porte de Versailles in France.
By incorporating its award-winning 8th Generation site technology utilizing
Vector Engine® BitBlast
into a custom-designed test fixture,
BPM Microsystems’ 2800ISP
allows customers to program flash architectures including eMMC, PCM and Raw NAND, plus microcontrollers and other device technologies on-board after reflow.
Ideal for medium to high-volume production, the 2800ISP is configurable and can program up to 16 devices in parallel. High-density flash memory devices are able to achieve read/write speeds up to 140Mbits per second. This solves the test bottleneck while allowing the operator to program the latest data just-in-time, all while attaining a very low programming cost per device
Also on display, the
3800 automated universal production programmer
supports microcontrollers, NAND flash, NOR flash, serial flash, managed NAND flash, E/EPROM, flash EPROM, and other technologies with densities up to an 8 Eb theoretical limit. Additionally, the system supports devices with voltages down to 0.7 (Vdd).
The 3800 is powered by BPM Microsystems’ Vector Engine Co-Processor® now with BitBlast technology. The new technology provides an extra boost to programming speeds for managed NAND devices that utilize the eMMC interface, which drastically increases overall throughput.
For more information about the 2800ISP in-system programming solution or the 3800 automated universal production programmer, visit
© 2015 USTECH. All Rights Reserved. |
Contact Us: 610-783-6100 | firstname.lastname@example.org
powered by GIM