Save. Share. Connect.
Thursday, August 25, 2016
VOLUME - NUMBER
SEMICON West '16
Atlantic Design/ATX/MDM '16
NEPCON China,SMT/Hybrid Pkg,EDS,EWPTE '16
ATX/MDM West '16
productronica,The ASSEMBLY Show, IMAPS, MDM/Minneapolis '15
Nepcon South China '15
SEMICON West '15
ATX/MDM EAST '15
EDS, SMT/Hybrid Pkg,Wire Tech Expo '15
NEPCON China '15
ATX WEST/APEX '15
AATE and IPC MW 11
SMTAI, Autotest, ATX MW/MDM and Assembly '14
SEMICON West '13
Electronics West/MDM and IPC/APEX '13
SEMICON West '14
NEPCON China, SMT/Hybrid Pkg, EDS, NWPTE '14
IPC APEX '14
Electronics West/MDM 10
ATX Midwest, IMAPS, PCB West '13
ATX West '14
ATExpo & IPC MW 07
NEPCON China '13, EDS, more
SEMICON WEST/Intersolar '12
NEPCON China Product Preview '12
Atlantic Design/MDM 10
Electronics West/MDM 11
SEMICON WEST 10
Atlantic Design/MDM 11
ATLANTIC DESIGN & MFG '13
Atlantic Design/MDM 09
SEMICON WEST 08
NEPCON South China '13
ATExpo & IPC MW 08
Electronics West/MDM 08
NEPCON China Product Preview '13
Electronic West/MDM 09
SMTAI and productronica '13
Multi tradeshow Product Preview '12
AATE/IPC Midwest 10
Electronics West/MDM 12
ATE and IPC MW 09
SMTAI and productronica '13
Atlantic Design/MDM 08
HOME / CURRENT ISSUE
Add Message Board
OK Int'l Headlines Scorpion Rework
Scorpion rework system.
Garden Grove, CA — OK International is showing its line of soldering tools and equipment for production assembly, highlighted the Scorpion Rework System, which meets the challenges of array package rework and the accurate placement of ball grid arrays (BGAs), in particular, while allowing for simultaneous viewing of PCB pads and component pads or balls.
In addition, it provides accurate component placement and can create specifically tailored reflow profiles through the company's special convection heating technology with nozzle and dual-zone preheater in one user-friendly, single platform rework system.
The Scorpion Rework System incorporates numerous features that ease the learning curve for new operators while providing the power and performance expected from more experienced users. The patent pending SmartPlace Technology vision system employs dual image overlay technology providing an image of the solder balls and PCB patterns without the need for complicated prism alignment. The system is completely self-contained and ready to use once it is plugged into a power outlet.
Also at the show: the BVX-200 Series Fume Extraction Systems. These systems are two-arm units that combine powerful fan performance with efficient filtration, quiet operation and complete portability. They can be placed under or next to the benchtop and fitted with either two 50mm (2-in.) diameter BVX arms or one 63mm (2.5-in.) diameter Omniflex arm.
Using the proven fan motor of the BVX-100 Series Fume Extraction Systems, the BVX-200 add a proprietary one-stage impeller design that doubles the total free-blowing airflow.
The result is a maximum free-blowing airflow of 250m
/h (150cfm), with a maximum suction force to provide ample capability in reserve to handle any clogging that may occur during the normal life of the filter. It is, in fact, the suction rating for this unit is one of the best in its class offered for such compact and portable systems.
Contact: OK International, 12151 Monarch St., Garden Grove, CA 92841
714-799-9910 fax: 714-799-9533 Web:
See at SMTAI Booth #615.
© 2015 USTECH. All Rights Reserved. |
Contact Us: 610-783-6100 | email@example.com
powered by GIM