Save. Share. Connect.
Wednesday, August 24, 2016
VOLUME - NUMBER
Daily News Archive
Front Page Articles
People in the News
Electronic Mfg. Services
Electronic Mfg. Products
HOME / CURRENT ISSUE
Daily News Archive
Add Message Board
VisionMaster Masters 3-D SPI with the Introduction of the M500
PORTLAND, ME ―
VisionMaster, Inc., a leading manufacturer of advanced 3-D solder paste inspection (SPI) and measurement equipment, debuts the M500 Manual 3-D SPI system. With the most advanced VisionMaster software to date, the M500 makes full use of modern multi-core processors and available GPU (video card) massive parallelism to speed up processing and user-responsiveness.
The M500 runs with a single click, automatically recognizing and measuring solder paste in the camera’s view. Height and volume readings for each pad are displayed clearly. Just as easily, double-clicking readings add them to the built-in SPC charts. Long life, solid-state LEDs are used for projection and background lighting. Additionally, advanced CMOS image sensors are immune to electrical analog noise, resulting in very repeatable measurements.
Like all other VisionMaster equipment, the M500 uses advanced white light Moiré interferometry to build height data for every pixel in the view at a fraction of the cost of the competition. VisionMaster honed this technology for SPI use and is the only manufacturer in the world deploying this sophisticated 3-D algorithm for manual benchtop units.
The M500 requires zero maintenance and is designed to provide years of trouble-free usage. Rugged yet light and portable, the sensor is machined from aircraft grade aluminum and is mounted on a vibration damping, ESD-resistant granite base. To ensure consistent high quality, more than 95 percent of components are sourced in the United States.
For more information about VisionMaster’s M500 Manual 3-D SPI system, visit
Established in 1996, VisionMaster is a privately held company that focuses on the most efficient, effective engineering to ensure the highest quality products. Focusing on R&D, VisionMaster has made strategic investments so that the company has the capacity to create custom components, which results in superior specs while lowering its – and it customers’ – costs. Every aspect of the M500 and A500 have been completely re-engineered, and the results show it.
© 2015 USTECH. All Rights Reserved. |
Contact Us: 610-783-6100 | email@example.com
powered by GIM