Thornwood, NY — Carl Zeiss has launched the AURIGA® Laser, a new advanced system combining the specific advantages of the AURIGA CrossBeam (FIB-SEM) workstation with the capabilities of a pulsed micro-focus laser for fast ablation of material.
|Laser system prepares samples for microscopy. |
The new development is particularly useful for the examination of samples where the target structure is deeply buried under material layers. To gain access to the target structure this material needs to be removed — a procedure which is difficult to conduct with conventional techniques. Mechanical ablation and cross-sectioning of large material volumes often cause deformations, making the sample unsuitable for further examination. In contrast, applying a focused ion beam is inefficient, because the process is much too slow. Ablation with a pulsed micro-focus laser beam offers clear advantages: it does not damage the sample, and it enables ablation rates comparable to mechanical removal.
The scanning laser used in this solution is a nanosecond pulsed, diode-pumped solid-state laser operating at 355nm provided by TRUMPF AG (Ditzingen, Germany). It was chosen from a broad range of different types of lasers because it optimally meets the demands of preparing structures for SEM examination.
In cooperation with Carl Zeiss, researchers from the Fraunhofer-Institute for Non-destructive Testing (IZFP — Fraunhofer-Institut fur Zerstorungsfreie Prufverfahren) in Dresden, have optimized the workflow of the innovative tool — ease of use, fast transfer procedures and fast relocation of the region of interest on the sample under examination, took center stage in the cooperative effort.
In order to protect the AURIGA FIB-SEM workstation and detectors from debris generated during the laser ablation process, the system is equipped with a separate chamber for laser operation. After preparing the structure of interest with the laser the sample is transferred under vacuum conditions to the main chamber for SEM examination or FIB polishing. Retrieving the target structure is achieved automatically. The transfer is carried out quickly and smoothly in a matter of seconds, resulting in a very simple and continuous workflow.
To achieve specific ablation patterns, the laser is equipped with CAD software controlling the scanner head. This enables the user to pre-define even highly complex patterns of the sample structure.
Contact: Carl Zeiss Microscopy, LLC, One Zeiss Drive, Thornwood, NY 10594 914-747-1800 Web: http://www.zeiss.com/micro