Manchester, CT — Multi-Seals Inc. has introduced Nano-forms epoxy preforms to provide precision seals on
|Ultra-tiny Nano-forms. |
microelectronics. With preforms as small as 0.035-in. (0.89mm) outside diameter and 0.011-in. (0.28mm) inside diameter, Nano-forms allow highly repeatable placement of minute amounts of epoxy with precision that is unattainable with traditional dispensing methods. With dimensional tolerances as close as ±0.0005-in. (±0.013mm) for critical applications, the product can control epoxy volume to within 0.00002cc for a typical configuration. Exceptional repeatability is further promoted with closely controlled pre-mixed ratios of resin to catalyst. In addition, Nano-forms are not affected by pot life, so epoxy viscosity is consistent from beginning to end of production batch.
This combination of precision and consistency makes the product especially suitable for sealing fiber optics and subminiature switches, capacitors, diodes, LEDs, and other microminiaturized components. Like other Uni-forms epoxy preforms, Nano-forms are pre-shaped, one-part resins that are solid at room temperature. When heated, Nano-forms melt and cure, forming a consistent seal that protects components from dust, moisture, oil, flux, solvents, conformal coatings, and other contaminants. Multiple epoxy systems are available to meet diverse application requirements.
Contact: Multi-Seals Inc., 540 North Main Street, Manchester, CT 06042 860-643-7188 fax: 860-643-5669 E-mail: email@example.com Web: http://www.multi-seals.com