Save. Share. Connect.
Sunday, October 23, 2016
VOLUME -27 NUMBER 7
Publication Date: 07/1/2012
Front Page News
People in the News
Electronic Mfg. Services
Electronic Mfg. Products
Special Features: Assembly and Production
Semicon West / Intersolar Product Preview
July 2012 Issue
Add Message Board
PEM Fasteners Are Nuts and Standoffs
Versatile hex fasteners.
Danboro, PA — New from PennEngineering are its ReelFast
) fasteners for compact electronic assemblies that install permanently on PCBs in the same manner and at the same time as other surface mount components prior to the automated reflow solder process. A special hex-shaped barrel provides a larger solder area and, upon installation, the steel fasteners become another board component. The fasteners can serve equally well as nuts or standoffs to space or stack PCBs, mount boards, or attach components.
Using the fasteners can reduce the risk of damage to boards — and resulting scrap — that may occur when conventional fasteners are improperly installed with off-line equipment. They also minimize the number of loose parts, reduce board handling, and promote quicker assembly by eliminating secondary operations.
The fasteners are offered in thread sizes as small as M1/#0-80 and lengths as short as 1mm (0.62-in.). All can be installed in boards as thin as 0.5mm (0.020-in.).
Fasteners are packaged on 13-in. recyclable reels that are 16mm wide. Reels conform to EIA-481 standards and are compatible with existing SMT automated installation equipment. A supplied polyimide patch for the end of the fastener allows for vacuum pickup.
Contact: PennEngineering, 5190 Old Easton Road, Danboro, PA 18916-1000.
800-237-4736 or 215-766-8853 fax: 215-766-0143 Web:
© 2015 USTECH. All Rights Reserved. |
Contact Us: 610-783-6100 | firstname.lastname@example.org
powered by GIM