Save. Share. Connect.
Tuesday, January 17, 2017
VOLUME - NUMBER
NEPCON South China '16
SEMICON West '16
Atlantic Design/ATX/MDM '16
NEPCON China,SMT/Hybrid Pkg,EDS,EWPTE '16
ATX/MDM West '16
productronica,The ASSEMBLY Show, IMAPS, MDM/Minneapolis '15
Nepcon South China '15
SEMICON West '15
ATX/MDM EAST '15
EDS, SMT/Hybrid Pkg,Wire Tech Expo '15
NEPCON China '15
ATX WEST/APEX '15
AATE and IPC MW 11
SMTAI, Autotest, ATX MW/MDM and Assembly '14
SEMICON West '13
Electronics West/MDM and IPC/APEX '13
SEMICON West '14
NEPCON China, SMT/Hybrid Pkg, EDS, NWPTE '14
IPC APEX '14
Electronics West/MDM 10
ATX Midwest, IMAPS, PCB West '13
ATX West '14
ATExpo & IPC MW 07
NEPCON China '13, EDS, more
SEMICON WEST/Intersolar '12
NEPCON China Product Preview '12
Atlantic Design/MDM 10
Electronics West/MDM 11
SEMICON WEST 10
Atlantic Design/MDM 11
ATLANTIC DESIGN & MFG '13
Atlantic Design/MDM 09
SEMICON WEST 08
NEPCON South China '13
ATExpo & IPC MW 08
Electronics West/MDM 08
NEPCON China Product Preview '13
Electronic West/MDM 09
SMTAI and productronica '13
Multi tradeshow Product Preview '12
AATE/IPC Midwest 10
Electronics West/MDM 12
ATE and IPC MW 09
SMTAI and productronica '13
Atlantic Design/MDM 08
Add Message Board
Conformal Coatings from Lackwerke Peters
Conformal coating leaves LED clear.
Kempen, Germany — Lackwerke Peters GmbH + Co KG is showing its wide variety of conformal coatings and solder photoresists. Fast drying at room temperature and easy to repair, with special adjustments for special tasks, the company's Elpeguard
conformal coatings of the series SL 1307 FLZ/2 are a good choice for most electronics applications.
These conformal coatings for assembled printed circuit boards resist yellowing, and can be easily soldered-through or removed by product-specific thinner. The thixotropic version SL 1307 FLZ/3 ensures high climatic resistance with optimal edge coverage even on sharp-edged component leads.
The ultra-thixotropic adjustment SL 1307 FLZ-T (also available in cartridges) can be easily and precisely applied by using a dispenser.
This way, dams can be built around connectors, components and pads to prevent the penetration or spreading of a conformal coating applied later (dam and fill).
SL 1307 FLZ-S is available in practical spray cans, making it readily available for service and repair work and for fast coating of pilot and low-volume products.
Selective coating with the white opaque conformal coating SL 1397 ensures maximum luminous efficacy: The LEDs are left uncoated while dark components are hidden, providing a boost to the perceived light output.
Application of the black opaque, mat conformal coating SL 1347 ensures a strong contrast to the base material. With this material, it is possible to coat selected areas of assemblies (which are usually coated with green solder resist) in black to achieve a strong contrast of the LEDs to the non-reflective base material. This is of particular advantage in applications with emphasis on high optical quality, such as information panels and traffic lights.
Contact: Lackwerke Peters GmbH + Co KG, P.O. Box 10 05 20, 47882 Kempen, Germany
+49 (0) 21 52 20 09 - 0 fax: +49 (0) 21 52 20 09 - 70 E-mail: email@example.com Web:
See at SMT/Hybrid Booth #9-317.
© 2015 USTECH. All Rights Reserved. |
Contact Us: 610-783-6100 | firstname.lastname@example.org
powered by GIM